Configure SES-Imagotag on a Device OverrideNEW!

About this task

To configure SES-Imagotag on a device override, take the following steps:

Procedure

  1. Go to Manage > Devices.
  2. Select one of the supported AP models.
    The following access points support SES-Imagotag:
    • AP305C
    • AP410C
    • AP5010
  3. From the left pane, select Configure > Interface Settings.
  4. Scroll down to the SES-Imagotag pane and select Enable Imagotag.
  5. Configure the SES-Imagotag settings.