Before you begin
Configure a network policy.
About this task
Use this task to specify how frequently APs send data to ExtremeCloud IQ. These
parameters enable adjustments to accommodate situations where devices are connected
over slower links and where the data must be aggregated at different rates.
Note
It
is not necessary to change the default values if devices are connected over
faster links.
Procedure
-
Toggle Enable Presence
Analytics
On.
-
Enter a name.
-
Enter an optional description.
-
For Trap Interval,
set how often the presence sensor reports data to ExtremeCloud IQ.
Lowering this interval below 15
seconds pushes data faster but also increases network traffic. Raising this
interval above 15 seconds pushes data at a slower rate and decreases network
traffic.
-
Set the Aging Time of a
given presence profile.
-
Set the Aggregate Time
interval number for the period of time that aggregation will be done for a given
presence profile.
