Configure AP Device Template Advanced Settings

Before you begin

Create or edit an AP template.

ExtremeCloud IQ can update device firmware and reboot the device during onboarding.

Select the Advanced Settings tab.
For Upload device firmware upon device authentication, select On to upgrade the device firmware upon onboarding.
If you have activated device firmware upgrading, select one of two options:
- Update firmware to the latest version.
- Upgrade to a specific device firmware version.
To Reboot after uploading, select On.

Note
Extreme Networks recommends disabling the reboot option when deploying devices in a meshed environment.
To use Supplemental CLI, select On.
For more information, see Configure Supplemental CLI.
Select a Country Code from the dropdown.

Note
For Legacy World and EU SKU devices, the template country code assignment only takes place when a device is initially onboarded.
Enable POE Profile Override (AP5010 only), select the override option from the dropdown, and hover over the i to view the corresponding override table.

Complete configuring the device template.