Configure Policy Settings

About this task

The following configuration settings are optional, depending upon your requirements. For example, choose which default routing instance will be used for NTP, DNS, Syslog, and SNMP for a switch.

  • DNS Server (Switches only)
  • NTP Server (Switches only)
  • SNMP Server (Switches only)
  • Syslog Server Settings (Switches only)
  • Device Credentials
  • Device Time Zone
  • HIVE
  • Management & Native VLAN
  • IP Tracking
  • LLDP/CDP (Switches only)
  • Management Settings
    • Management Options
    • Traffic Filter
    • MGT IP Filter

Procedure

  1. Navigate to Configure > Network Policies.
  2. Select the existing network policy and Edit.
  3. Configure a DNS Server.
  4. Configure an NTP Server.
  5. Configure an SNMP Server.
  6. Configure a Syslog Server.
  7. Configure Device Credentials.
  8. Configure a Classification Rules Network Policy.
  9. Configure a Hive Profile.
  10. Configure VLAN Settings.
  11. Configure an IP Tracking Group.
  12. Configure LLDP and CDP Settings.
    Note

    Note

    To configure LLDP port configurations on SR22XX, 23XX, VOSS, and EXOS devices, go to the device template or device configuration page. Configuring LLDP from this page can affect APs, XR, and 20XX/21XX switches, along with certain EXOS, VOSS, SR22XX, and 23XX Global LLDP parameters.
  13. Add Management Options.
  14. Configure Traffic Filters.
  15. Configure MGT IP Filters.
  16. Select Save.