Configure RF Interface Reports

About this task

ExtremeCloud IQ can periodically poll APs and collect RF interface-related data. ExtremeCloud IQ forces APs to adopt a shorter polling interval if CRC error, channel interference, or short-term polling thresholds are exceeded.
Note

Note

Extreme Networks provides defaults for each item in this section. The following steps are optional.

Procedure

  1. Set the level of CRC errors for polling.
    The default threshold is 20% for 802.11g/n, and 35% for 802.11a and 802.11ac. The range is from 15 to 60%.
  2. Set the level of channel interference for polling.
    The default threshold is 20% for 802.11g/n, and 35% for 802.11a and 802.11ac. The range is from 15 to 60%.
  3. Set the short-term average for polling.
    The range is 5 to 30 minutes.