Before you begin
Before you can assign an sFlow receiver to a switch, you must first configure sFlow
receivers as common objects. sFlow is not available for all Extreme switch models.
See Configure an sFlow Receiver.
About this task
Use the following steps to assign sFlow receivers that you have configured as common
objects to switches at the device level.
Note
sFlow assignments made at the device
level override assignments made in the network policy device
template.
Procedure
-
Select the add icon.
-
Enable sFlow Receiver.
-
Enable Interface Packet Sampling.
-
Move interfaces you want to
sample from the Available column to the
Selected Interfaces column using the arrows.
-
Enable Counter Polling.
-
Move interfaces you want polled
from the Available column to the Selected
Interfaces column.
-
Select Save.
-
Select Save sFlow Receivers.
