Configure SES-imagotag on a Device TemplateNEW!

About this task

To configure SES-Imagotag on the device template, take the following steps:

Procedure

  1. Go to Configure > Common Objects > Policy > AP Templates.
  2. Select an AP template for one of the supported AP models.
    The following access points support SES-Imagotag:
    • AP305C
    • AP410C
    • AP5010
  3. Scroll down to the SES-Imagotag pane and select Enable Imagotag.
  4. Configure the SES-Imagotag settings.