Before you begin
Physically connect the device to a Fabric Connect-enabled switch. To perform the
following task, you will need the device VLAN ID and I-SID number.
For more information about Fabric Attach, see Fabric Attach.
About this task
Use this task to configure a device connected to an existing Fabric Connect
network.
Procedure
-
From within the network policy,
navigate to the Device
Template page and scroll down to the Wired Interfaces
section.
-
Select the add icon next to the Fabric Attach
field.
-
Enter the device's associated
VLAN
ID and select its I-SID# from the
drop down.
-
Select Save.
