Configure Wireless Interfaces for an AP Template

About this task

This task provides steps for configuring the WiFi0 and WiFi1 ports on an AP template.

Procedure

  1. Go to Configure > Common Objects > Policy > AP Template.
  2. Locate a Device Model and select an existing Template, or a default template.
  3. Scroll down to the Wireless Interfaces pane.
  4. Turn Radio Status On.
  5. Select a radio profile from the drop-down list.
    You can also add a new radio profile here, or clone and modify an existing radio profile. To add a new radio profile, see Add a Radio Profile.
  6. Select the Radio Usage type.
    • Select Client Mode to configure a device for AP client mode radio usage, and to configure advanced features such as Port Forwarding Rules and DHCP Server settings. Choose a Client Mode Profile from the drop-down list. If required, you can create a new Client Mode Profile or edit an existing profile.
    • Select Client Access for normal client operation. Optionally, select Backhaul Mesh Link for wireless portal and mesh backhaul operation.
    • Select Sensor for presence operation.

What to do next

Continue configuring the AP template.