This condition occurs when the Sequence Id in the received pdelay Response message does not match the transmitted Sequence Id (rcvdPdelayRespPtr->SequenceId != txPdelayReqPtr->sequenceId). The MDPdelayReq state machine transitions from the WAITING_FOR_PDELAY_RESP to the RESET state as described in figure 11-8 of the IEEE 802.1AS-2001 document. Note - this message is only recorded when the number of lost Responses is greater or equal to allowed lost responses as defined in the RESET state.
No action required - Informational message only.
Debug-Verbose
asCapable is %asCapable% => 0, port = %port%: rcvdPdelayRespPtr->sequenceId (%rcvSeqId%) != txPdelayReqPtr->sequenceId (%txSeqId%): lostResponses = %lostResponses%: allowedLostResponses = %allowedLostResponses%: transition from WAITING_FOR_PDELAY_RESP to RESET state
| Name | Type |
|---|---|
| asCapable | uInt |
| port | SlotPort |
| rcvSeqId | uInt |
| txSeqId | uInt |
| lostResponses | uInt16 |
| allowedLostResponses | uInt16 |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB