disable virtual-router

disable virtual-router vrf-name

Description

Disables a VRF.

Note

Note

This command is only applicable for VRFs.

Syntax Description

vrf-name Specifies the name of the VRF.

Default

Enabled.

Usage Guidelines

When you disable a VRF, the software does the following:
  • Disables Layer 3 protocols.
  • Marks static routes as inactive and removes them from the hardware forwarding tables.
  • Flushes the IP ARP and IPv6 neighbor-discovery caches.

Example

The following example disables VRF "vrf1":

disable virtual-router vrf1

History

This command was first available in ExtremeXOS 12.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.