unconfigure radius-accounting

unconfigure radius-accounting {mgmt-access | netlogin} {server [primary | secondary]}

Description

Unconfigures the RADIUS accounting server configuration.

Syntax Description

mgmt-access Specifies the switch management RADIUS accounting server.
netlogin Specifies the network login RADIUS accounting server.
primary Unconfigures the primary RADIUS accounting server.
secondary Unconfigures the secondary RADIUS accounting server.

Default

Unconfigures both the primary and secondary accounting servers for management and network login.

Usage Guidelines

If you do not specify any keywords, this command unconfigures both the primary and secondary accounting servers for management and network login.

The following list describes the available keywords:
  • mgmt-access—Use this keyword to unconfigure only the accounting server(s) for management functions.

  • netlogin—Use this keyword to unconfigure only the accounting server(s) for network login.

  • primary—Use this keyword to specify only the primary RADIUS accounting sever.

  • secondary—Use this keyword to specify only the secondary RADIUS accounting server.

Example

The following command unconfigures the secondary RADIUS accounting server settings for both management and network login:

unconfigure radius-accounting server secondary

The following command unconfigures the secondary RADIUS accounting server settings for only network login:

unconfigure radius-accounting netlogin server secondary

The following command unconfigures all RADIUS accounting server settings for only management functions:

unconfigure radius-accounting mgmt-access

History

This command was first available in ExtremeXOS 10.1.

The mgmt-access and netlogin keywords were added in ExtremeXOS 11.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.