configure cfm domain association ports end-point

configure cfm domain domain_name association association_name ports port_list end-point [up | down] [enable | disable]

Description

Enables or disables an MEP.

Syntax Description

domain_name

Specifies the domain name.

association_name

IEEE 802.1ag or ITU-T Y.1731 association name.

port_list

Specifies the ports to configure.

up

Specifies that the end point is up.

down

Specifies that the end point is down.

Default

MEP is enabled by default.

Usage Guidelines

Use this command to enable or disable an MEP.

Use the show cfm command to verify your configuration.

History

This command was first available in ExtremeXOS 12.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.