unconfigure ports link-flap-detection

unconfigure ports [port_list | all] link-flap-detection {interval} {threshold} {disable-time}

Description

Sets interval, threshold (maximum number of link down events), and disable time to defaults for link-flap detection.

Syntax Description

ports Physical ports.
port_list List of ports to set link-flap detection characteristics back to defaults upon.
all Sets link-flap detection characteristics to defaults on all ports in the system.
link-flap-detection Specifies link-flap detection.
interval Resets the time interval for collecting link-flap events to the default of 5 seconds.
threshold Resets the number of link-flap events tolerated before action is taken to the default of 10.
disable-time Resets the time period a port remains disabled after excessive link flapping to the default of 300 seconds.

Default

N/A

Example

The following example resets the link-flap detection interval and threshold to their defaults on ports 1–4.

unconfigure ports 1-4 link-flap-detection interval threshold

History

This command was first available in ExtremeXOS 22.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.