show policy convergence-endpoint ports

show policy convergence-endpoint ports [port_list | all]

Description

This command displays the enable status of all supported Convergence End Point (CEP) types by port.

Syntax Description

port_list Shows enable status for the listed ports.
all Shows enable status for all ports.

Default

N/A

Example

The following example shows the CEP enable status for port 3:

# show policy convergence-endpoint ports 3
Port        Cisco     LLDP-MED
----------  --------  --------
   3             enabled   disabled

History

This command was first available in ExtremeXOS 22.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.