unconfigure bootprelay include-secondary

unconfigure bootprelay {ipv4 | ipv6} {vlan} vlan_name include-secondary

Description

Removes the specified smart relay configuration that was specified at the VLAN level.

Syntax Description

ipv4 Specifies unconfiguring the DHCPv4 BOOTP Relay service (default).
ipv6 Specifies unconfiguring the DHCPv6 BOOTP Relay service.
vlan Unconfigures BOOTP relay for a specified VLAN.
vlan_name Specifies the VLAN name.
include-secondary Removes the include-secondary configuration for the specified VLAN.

Default

IPv4 is the default relay service.

Usage Guidelines

Use this command to remove the specified smart relay configuration that was specified at the VLAN level.

Example

The following command removes DHCPv4 BOOTP Relay service, and removes the include-secondary configuration for the VLAN "vlan 100":

unconfigure bootprelay ipv4 vlan  vlan_100 include-secondary

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.