configure keychain accept-tolerance

configure keychain keychain_name accept-tolerance seconds

Description

This command configures a keychain accept tolerance in seconds.

Syntax Description

keychain_name Specifies the name of the keychain.
accept-tolerance Specifies the length of time an expired key can be accepted for received packets.
seconds Specifies the tolerance in seconds. Range is 0-600 (default is 0).

Default

The default is 0, no tolerance.

Usage Guidelines

Use this command to configure a keychain accept tolerance.

Example

The following command configures the keychain accept tolerance:

configure keychain accept-tolerance 55

History

This command was first available in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.