disable cfm segment frame-delay measurement

disable cfm segment frame-delay measurement segment_name {mep mep_id}

Description

Stops DMM frame transmission.

Syntax Description

segment_name

An alpha numeric string identifying the segment name.

mep mep_id

Specifies the maintenance association End Point that helps trigger a particular MEP level session on that segment. The range is 1-8191. The default is all MEPs on the segment.

Default

N/A.

Usage Guidelines

Use this command to stop transmission of DMM frames for a selected CFM segment. This command stops transmission that has been triggered using the command enable cfm segment frame-delay measurement.

This stops the transmission for both continuous and on-demand mode.

Example

The following command stops frame transmission on the CFM segment segment-first:

disable cfm frame-delay measurement segment-first

History

This command was first available in ExtremeXOS 12.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.