configure fabric attach management-vlan ports

configure fabric attach management-vlan ports [port_list | all] forward [on | off]

Description

Configures the Fabric Attach management VLAN propagation on a specific port.

Syntax Description

management-vlan Specifies setting he VLAN advertised to Fabric Attach clients for them to use as the management VLAN. (Default is none.)
ports Specifies the port to configure.
port_list Specifies a list of ports to configure.
all Specifies configuring all ports in the system.
forward Configures whether Fabric Attach proxy switches send Management VLAN data to clients.
on Fabric Attach proxy switches send Management VLAN data to clients (default).
off Fabric Attach proxy switches do not send Management VLAN data to clients.

Default

All ports are configured to propagate the management VLAN.

When disabled, the port will not send out the management VLAN information in the element TLV Support.

Usage Guidelines

This command is only used when operating as a Fabric Attach server. It has no effect when operating as a client or proxy.

Example

The following example disables Fabric Attach port 25 from sending Management VLAN data to clients.

# configure fabric attach management-vlan port 25 forward off

History

This command was first available in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.