show iproute reserved-entries

show iproute reserved-entries {slot slot_num}

Description

Displays the configured number of IPv4 and IPv6 routes reserved in the Longest Prefix Match (LPM) hardware table.

Syntax Description

slot_num For SummitStack only, this option displays the reservations for the specified slot.

Default

N/A.

Usage Guidelines

The IPv4 Routes column in the command output shows whether IPv4 routes are stored in LPM tables.

To modify the configuration that this command displays, use the following command:

configure iproute reserved-entries [ num_routes_needed | maximum | default ] slot [all |slot_num]

Example

The following example displays the reserved space for IP routes:

Slot-3 Stack.30 # show iproute reserved-entries 
                               # Reserved Routes            Minimum #
Slot  Type                IPv4   (or IPv6)            IPv4 Hosts
----  ----------------    -------  ------------------   ----------
1     X460G2-48t-10G4      8144  (  4072)                   4112
2     X460G2-48t-10G4      8144  (  4072)                   4112
3     X670G2-48x-4q        12240  (  6120) [default]        4112
4     
5     
6     
7     
8     

Maximum supported #      IPv4 (or IPv6) Reserved Routes:
X435                        32  (    16)          
X440G2, X620                480  (   240)          
X460G2                      12256  (  6128)          
X450G2, X460G2-16MP         16352  (  8176)          
X465, X590,                 16352  (  8176)                    
X695                        32736  ( 16368) 

Note:  IPv4 Hosts can occupy unused HW Route table space,
       unless # Reserved Routes is "maximum".

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.