show vpex stacking

show vpex stacking

Description

In an Extended Edge on stacking environment, this command shows Virtual Port Extender (VPEX) information for all nodes in the topology.

Syntax Description

vpex Specifies Virtual Port Extender (VPEX).
stacking Specifies VPEX stacking information.

Default

N/A.

Usage Guidelines

This command is only available in dot1BR controlling bridges and not available on other stackables.

Example

The following example shows VPEX stacking information:

Node MAC Address   Slot Flags
    ------------------ ---- -----
    *00:11:22:33:44:55  1   eEmc-
     00:00:44:33:22:11  2   e--c-
     00:99:88:77:66:55  3   e--cA
* - Indicates this node
Flags: (e) VPEX enabled setting is on, (E) VPEX is Active,
       (m) VPEX MLAG mode is configured, (c) VPEX-capable node,
       (A) Active stack node

History

This command was first available in ExtremeXOS 31.4.

Platform Availability

This command is available on the ExtremeSwitching X465, X590, and X690 series switches.