configure cfm domain association add remote-mep

configure cfm domain domain_name association association_name add remote-mep mepid { mac_address mac_address }

Description

Allows you to add a remote MEP with the given MEP ID and MAC address to an existing association.

Syntax Description

domain_name Enter the domain associated with the MA you are configuring.
association_name IEEE 802.1ag or ITU-T Y.1731 association name.
mepid Enter the MEP ID of the remote MEP being added. The range is 1 to 8191.
mac_address Specifies the MAC address for the remote MEP being added.

Default

N/A.

Usage Guidelines

Use this command to add a remote MEP with given MEP ID and MAC address to an existing association. Use the show cfm detail command to verify your configuration.

History

This command was first available in ExtremeXOS 12.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.