install image inactive

install image inactive {slot slot}

Description

Copies the image installed on the active partition to the inactive partition.

Syntax Description

inactive Copy image from active partition to inactive partition. This includes the .xos image and all .xmod and .lst files.
slot Copy image only on the specified slot. Default is to copy to all slots.
slot Specifies slot number to copy image to.

Default

By default, for stacks, if a slot is not specified, the image is copied to all slots.

Usage Guidelines

Copying from active partition to inactive partition includes the .xos image and all .xmod and .lst files.

This command can act on any or all slots only from the master. If not from the master, the command can only act on its own slot.

Example

The following example copies the image on the active partition to the inactive partion:
# install image inactive
This will overwrite the image installed on the secondary partition with the image installed on the primary partition.
Do you want to proceed? (y/N) Yes
Copying image to secondary partition... 100% complete.
Image installed to the secondary partition successfully.

History

This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.