show sflow configuration

show sflow {configuration}

Description

Displays the current sFlow configuration.

Syntax Description

configuration Displays the sFlow configuration.

Default

N/A.

Usage Guidelines

This command displays the sFlow configuration of your system.

The following fields are displayed:
  • Global Status—sFlow is globally enabled or disabled.

  • Polling interval—How often the hardware is polled for statistics, in seconds.

  • Sampling rate—Packets are sampled, on average, once for every rate-number of packets.

  • Maximum cpu sample limit—Maximum number of packets per second sampled before sample throttling takes effect.

  • Agent IP—IP address inserted into the sFlow data packets to identify the sFlow switch.

  • Collectors—To which IP address and port, and from which virtual router, the sFlow packets are sent.

  • Port Status—Enabled or disabled for statistics gathering.

  • Port Sample-rate—Shows the sampling rate configured for the port and the actual rate if CPU throttling has taken effect.

  • Port Subsampling factor—for details, see the command configure sflow max-cpu-sample-limit.

Example

To display the sFlow configuration on your system, use the following command:

show sflow

The following is an example of the show sflow configuration command :

SFLOW Global Configuration   
Global Status: enabled   
Polling interval: 20   
Sampling rate: 8192   
Maximum cpu sample limit: 2000   
SFLOW Configured Agent IP: 0.0.0.0 
Operational Agent IP: 10.127.11.88   
Collectors      

SFLOW Port Configuration   
Port  Status           Sample-rate         Subsampling   Sflow-type                          
                       Config / Actual        factor      Ingress / Egress   
5:21   enabled           8192 / 8192             1        Disabled / Enabled  

History

This command was first available in an ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.