configure inline-power priority
ports
    
    
        
      
                configure inline-power priority [critical | high | low] ports port_list
            
    
        Description
      
      Sets the This command is available
          on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, and X620 series
          switches. priority on the specified
                ports.
    
        Syntax Description
      
      
                        
                            | 
                                critical | high | low
                             | 
                            Sets the PoE priority for the
                                specified ports. | 
                        
                        
                            | 
                                port_list
                             | 
                            Specifies one or more ports or
                                slots and ports. | 
                        
                    
    
        
        Usage Guidelines
      
      The system allocates power to those ports with the highest priorities
                first. This command can also be used in conjunction with the configure inline-power disconnect-precedence command.
                If you configure the disconnect precedence as lowest priority, then newly detected
                PDs will be powered if that port has higher priority than the existing powered
                ports.
      If
there are multiple ports at the same priority level (either configured
or by default) and one of the ports must have power withdrawn because
of excessive power demands, those ports with the lower port number
are powered first. The higher port numbers have power withdrawn
first in the case of equal PoE port priorities.
    
        Example
      
      The following command assigns a critical PoE priority on ports 4 – 6 on
                slot 3 on a SummitSwitch:
      
configure inline-power priority critical ports 3:4-3:6
     
        History
      
      This command was
first available in ExtremeXOS 11.1.
    
        Platform Availability
      
      This command is available on: 
            
            
                    - ExtremeSwitching
                                                  X450-G2-24p-GE4—ExtremeXOS 16.1 and
                                                later.
 
                    - ExtremeSwitching
                                                  X450-G2-48p-GE4—ExtremeXOS 16.1 and
                                                later.
 
                    - ExtremeSwitching
                                                  X450-G2-24p-10GE4—ExtremeXOS 16.1 and
                                                later.
 
                    - ExtremeSwitching
                                                  X450-G2-48p-10GE4—ExtremeXOS 16.1 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-24p-10GE4—ExtremeXOS 15.6 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-48p-10GE4—ExtremeXOS 15.6 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-24p-GE4—ExtremeXOS 15.6 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-48p-GE4—ExtremeXOS 15.6 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-16mp-32p-10GE4—ExtremeXOS 15.6 and
                                                later.
 
                    - ExtremeSwitching
                                                  X460-G2-24p-24hp-10GE4—ExtremeXOS 22.2 and
                                                later.
 
                    - ExtremeSwitching
                                                  X440-G2-48p-10GE4—ExtremeXOS 21.1 and
                                                later.
 
                    - ExtremeSwitching
                                                  X440-G2-24p-10GE4—ExtremeXOS 21.1 and later. 
 
                    - ExtremeSwitching
                                                  X440-G2-12p-10GE4—ExtremeXOS 21.1 and
                                                later.
 
                    - ExtremeSwitching X465-48P—ExtremeXOS 30.2 and later.
 
                    - ExtremeSwitching
                            X435-8P-4S—ExtremeXOS 30.5 and
                        later.
 
                    - ExtremeSwitching
                            X435-24P-4S—ExtremeXOS 30.5 and
                        later.
 
                    - ExtremeSwitching
                            X435-8P-2T-W—ExtremeXOS 30.5 and
                        later.
 
                
            
            
                - ExtremeSwitching X465-24MU-24W—ExtremeXOS 30.2 and later.
 
                - ExtremeSwitching X465-48W—ExtremeXOS 30.2 and later.
 
                - ExtremeSwitching X465-24MU—ExtremeXOS 30.2 and later.
 
                - ExtremeSwitching X465-24W—ExtremeXOS 30.2 and later.
 
                                - ExtremeSwitching
                                                X465i-48W—ExtremeXOS 30.5 and later.