configure radius port bounce

configure radius port bounce [ on | off]

Description

This command configures port bouncing on a port, which temporarily disables and re-enables a network port in order to reinitiate a DHCP request.

Syntax Description

on Specifies turning ON port bounce.
off Specifies turning OFF port bounce (Default).

Default

OFF.

Usage Guidelines

The following conditions must be met for this command to work:

Example

The following example turns on port bouncing on a switch:

# configure radius port bounce on

History

This command was first available in ExtremeXOS 32.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.