configure vman protocol

configure vman [vman_name | vman_list] protocol {filter} filter_name

Description

Configures a VMAN to use a specific protocol filter.

Syntax Description

vman_name Specifies a VMAN name.
vman_list Specifies a VMAN list.
protocol Specifies a protocol filter.
filter Specifies a protocol filter.
filter_name Specifies a protocol filter name.

Default

N/A.

Usage Guidelines

Use this command to configure a VMAN to use a specific protocol filter.

Protocol Filters

These devices do not forward packets with a protocol-based VLAN set to AppleTalk. To ensure that AppleTalk packets are forwarded on the device, create a protocol-based VLAN set to “any” and define other protocol-based VLANs for other traffic, such as IP traffic. The AppleTalk packets pass on the “any” VLAN, and the other protocols pass traffic on their specific protocol-based VLANs.

Example

The following example configures the protocol filter “my_filter” to vlan v1:

configure vlan v1 protocol my_filter
configure vlan v1 protocol  filter  my_filter

History

This command was first available in ExtremeXOS 10.1.

The filter keyword was added in ExtremeXOS 15.5.

The vman_list variable was added in ExtremeXOS 16.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.