show elrp disabled-ports

show elrp disabled-ports

Description

Displays information about ELRP disabled ports.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

This command displays the results of disabling ports using the configure elrp-client periodic command.

This command displays the following:
  • Exclude EAPS ring ports—Whether EAPS ring ports can be excluded.

  • Exclude VXLAN RTEPs—Whether VXLAN remote endpoints can be excluded.
  • Exclude inter-VLAN loop ports—Whether inter-VLAN loop ports can be excluded.
  • Excluded Ports—User defined ports that will not be disabled.

  • Disabled Port—The port that ELRP disabled.

  • Detected VLAN—The VLAN with looping ELRP PDU(s).

  • Duration—The configured time to keep the port disabled.

  • Time Disabled—The time when ELRP disabled the port.

Example

The following example shows ELRP information for disabled ports:

# show elrp disabled-ports 

  Exclude EAPS ring ports : No
  Exclude VXLAN RTEPs     : Yes
  Exclude inter-VLAN loop ports :No
  Excluded Ports
  ---------------------------------------------------------------------------

  ---------------------------------------------------------------------------

  Disabled                   Detected             Duration  Time                     Disable  
  Port/Virtual Port          Vlan                 (sec)     Disabled                 Direction
  --------------------------------------------------------------------------------------------
  --------------------------------------------------------------------------------------------

History

This command was first available in ExtremeXOS 12.4.

The excluded port list was added in ExtremeXOS 12.5.3.

VXLAN remote endpoint exclusion information was added in ExtremeXOS 22.4.

Inter-VLAN loop ports exclusion information was added in ExtremeXOS 30.1.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.