show snmpv3 notify

This command displays the snmpNotifyTable.

show snmpv3 notify {[[hex hex_notify_name] | notify_name]}

Description

Displays the notifications that are set.

Syntax Description

hex_notify_name Specifies the parameter name associated with the target. The value is to be supplied as a colon separated string of hex octets.
notify_name Specifies the parameter name associated with the target. The value is to be supplied in ASCII format.

Default

N/A.

Usage Guidelines

Use this command to display entries from the SNMPv3 snmpNotifyTable. This table lists the notify tags that the agent will use to send notifications (traps).

If no notify name is specified, all the entries are displayed.

Example

The following command displays the notify table entries:

show snmpv3 notify

The following is sample output from this command:

# show snmpv3 notify
Notify Name     : defaultNotify
Tag             : defaultNotify
Type            : Trap
Storage Type    : NonVolatile
Row Status      : Active
Notify Name     : xyz
Tag             : xyz1
Type            : Inform
Storage Type    : NonVolatile
Row Status      : Active
Total entries in snmpNotifyTable : 2

History

This command was first available in ExtremeXOS 10.1.

The hex_notify_name parameter was added in ExtremeXOS 11.0.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.