configure ssh2 x509v3 username overwrite

configure ssh2 x509v3 username overwrite [on | off]

Description

Enables or disables authentication username configuration to use the Principal Name in the certificate as the username.

Syntax Description

x509v3 Specifies x509v3 public-key authentication.
username Specifies X509v3 authentication username configuration.
overwrite Specifies that when radius-password-auth is turned on, to use the Principal Name in the certificate as the username.
on Specifies to enable X509v3 authentication username configuration.
off Specifies to disable X509v3 authentication username configuration. (Default).

Default

Off.

Usage Guidelines

Example

The following example enable using the Principal Name in the certificate as the username.

# configure ssh2 x509v3 username overwrite on 

Note: This command is applicable only if X509v3 'radius-password-auth' command is turned on. 

History

This command was first available in ExtremeXOS 32.2.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.