show policy capability

show policy capability

Description

This command to display all policy classification capabilities supported by your device.

Syntax Description

This command has no arguments or variables.

Default

N/A.

Usage Guidelines

The output of this command shows a table listing classifiable traffic attributes and the type of actions, by rule type, that can be executed relative to each attribute. Above the table is a list of all the actions possible on this device.

Example

The following example displays all policy classification capabilities supported by the device:

# show policy capability
Priority                Permit                  Deny
 Precedence Reordering   TCI Overwrite           Rules Table
 Rule-Use Accounting     Rule-Use Notification   CoS Table
 Longest Prefix Rules    Port Disable Action     Auto Clear Interval
 RFC 3580 Map            Policy Enable           Mirror Action
 Web Redirect            Authentication Override NSI
 Access List

 ===========================================================================
 |                         | D |   |   |   |   | F |   |   | D | T |   | Q |
 |                         | Y |   |   |   |   | O | S |   | I | C | M | U |
 |                         | N | A |   |   |   | R | Y |   | S | I | I | A |
 |                         | A | D | V |   | D | W | S | T | A | O | R | R |
 |                         | M | M | L | C | R | A | L | R | B | V | R | A |
 |                         | I | I | A | O | O | R | O | A | L | E | O | N |
 | SUPPORTED RULE TYPES    | C | N | N | S | P | D | G | P | E | R | R | T |
 ===========================================================================
 |MAC source address       | X | X |   | X | X | X | X | X | X |   | X |   |
 |MAC destination address  |   |   |   | X | X | X | X | X | X |   | X |   |
 |IPX source address       |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPX destination address  |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPX source socket        |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPX destination socket   |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPX transmission control |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPX type field           |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPv6 source address      |   |   |   |   |   |   |   |   |   |   |   |   |
 |IPv6 destination address |   |   |   | X | X | X | X | X | X |   | X |   |
 |IPv6 flow label          |   |   |   |   |   |   |   |   |   |   |   |   |
 |IP source address        |   |   |   | X | X | X | X | X | X |   | X |   |
 |IP destination address   |   |   |   | X | X | X | X | X | X |   | X |   |
 |IP fragmentation         |   |   |   | X | X | X | X | X | X |   | X |   |
 |UDP port source          |   |   |   | X | X | X | X | X | X |   | X |   |
 |UDP port destination     |   |   |   | X | X | X | X | X | X |   | X |   |
 |TCP port source          |   |   |   | X | X | X | X | X | X |   | X |   |
 |TCP port destination     |   |   |   | X | X | X | X | X | X |   | X |   |
 |ICMP packet type         |   |   |   | X | X | X | X | X | X |   | X |   |
 |TTL                      |   |   |   | X | X | X | X | X | X |   | X |   |
 |IP type of service       |   |   |   | X | X | X | X | X | X |   | X |   |
 |IP proto                 |   |   |   | X | X | X | X | X | X |   | X |   |
 |ICMPv6 packet type       |   |   |   | X | X | X | X | X | X |   | X |   |
 |Ether II packet type     |   |   |   | X | X | X | X | X | X |   | X |   |
 |LLC DSAP/SSAP/CTRL       |   |   |   |   |   |   |   |   |   |   |   |   |
 |VLAN tag                 |   |   |   |   |   |   |   |   |   |   |   |   |
 |Replace TCI              |   |   |   |   |   |   |   |   |   |   |   |   |
 |Application Layer        |   |   |   |   |   |   | X | X | X |   | X |   |
 |Access Control List      |   |   |   |   |   |   | X | X | X |   | X |   |
 |Port string              | X | X |   | X | X | X | X | X | X |   | X |   |
 ===========================================================================

History

This command was first available in ExtremeXOS 16.1.

The authentication override status was added in ExtremeXOS 22.2

Mirror action was added in ExtremeXOS 30.2.

ACL Style Policy support was added in ExtremeXOS 30.5.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X690, and X695 series switches.