The user can display all of the MPLS global information and all of the MPLS configuration information using the show run router mpls command. The show run router mpls command displays all of the detailed information.
device# show run router mpls
router mpls
policy
admin-group m2 2
traffic-eng isis level-1
retry-limit 22 rsvp
refresh-interval 40
rsvp
refresh-interval 40
ldp
hello-timeout 12 ka-interval 18
advertise-fec list1
session 10.30.30.6 key 1 $!dZ@
mpls interfaces
mpls-interface e1/1
ldp-enable
mpls-interface e1/2
ldp-enable
reservable-bandwidth percentage 80
admin-group 2
mpls paths
path mu1_to_mu3
strict 10.1.1.1
strict 10.1.1.2
strict 10.3.3.1
strict 10.3.3.2
path mu1_to_mu2_2
strict 10.5.1.1
strict 10.5.1.2
path mu1_to_mu2_1
strict 10.1.1.1
strict 10.1.1.2
lsp frr1
to 10.4.2.1
cos 6
ipmtu 1028
traffic-eng max-rate 180 mean-rate 125
metric 5
enable
lsp lsp13d
to 10.3.3.2
primary mu1_to_mu3
cos 7
traffic-eng max-rate 250 mean-rate 120 no cspf
enable
lsp lsp12d
to 10.1.1.2
cos 7
traffic-eng max-rate 100 mean-rate 50
enable
end of MPLS configuration