CoPP-related Commands

Table 1. Configuration commands
Command	How to use for CoPP
ip icmp-fragment enable	Drop ICMP fragment packets before they are used by hackers for Denial of Service (DoS) attacks.
ip option disable	Discard IP packets with options before hackers send such packets to initiate DoS attacks.
ip access-list extended class-map match access-group policy-map	Configure rate limiting actions. For more information, see CoPP Rate Limiting.
ip access-list extended ip receive access-group ipv6 access-list extended ipv6 receive access-group	Permit or deny unicast and multicast control packets. For more information, see CoPP Discard and Permit for Control Packets.

Table 2. Show commands
Command	How to use for CoPP
show access-list receive	See the configuration for permit and deny rules for control plan protection.
show statistics access-list	See statistics for packets that meet the permit and deny rules configured for control plane protection.
show policy-map control-plane	See the configuration of the policy map attached to a control plane interface.
show interface ethernet inc rate	See whether the control plane is receiving packets at the configured rate.
show qos cpu info show qos cpu cfg	CPU ports that allow packets into the control plane have limited bandwidth. View the maximum CPU rates and weighted fair queue values for the various VOQ groups.