enable ip anycast

enable ip anycast {vlan} vlan_name

Description

Enables IP anycast on a VLAN.

Syntax Description

ip Layer 3 Internet Protocol.
anycast Enables IP anycast-enabled VLANs to use the anycast MAC on that VLAN.
vlan Selects the VLAN.
vlan_name Specifies the VLAN name.

Default

N/A.

Usage Guidelines

To configure the anycast gateway MAC address that is used by VLANs that enable IP anycast, use the command configure ip anycast mac [none | mac].

Example

The following example enables IP anycast on the VLAN "vlan1":

# enable ip anycast vlan vlan1

History

This command was first available in ExtremeXOS 30.6.

Platform Availability

This command is available on all Universal switches supported in this document.