configure fdb mac-tracking ports

configure fdb mac-tracking {[add|delete]} ports [port_list|all]

Description

Enables or disables MAC address tracking for all MAC addresses on the specified ports.

Syntax Description

add Enables MAC address tracking for the specified ports.
delete Disables MAC address tracking for the specified ports.
port_list Specifies a list of ports on which MAC address tracking is to be enabled or disabled.
all Specifies that MAC address tracking is to be enabled or disabled on all ports.

Default

No ports are enabled for MAC address tracking.

Usage Guidelines

MAC address tracking events on enabled ports generate EMS messages and can optionally generate SNMP traps.

Note

Note

When a MAC address is configured in the tracking table, but detected on a MAC tracking enabled port, the per MAC address statistical counters are not updated.

Example

The following example enables MAC address tracking for all MAC addresses on port 2:1:

configure fdb mac-tracking add ports 2:1

History

This command was first available in ExtremeXOS 12.4.

Platform Availability

This command is available on all Universal switches supported in this document.