configure iparp reachable-time

configure iparp {reachable-time [auto | {reachable_time [seconds | milliseconds]}]}

Description

Sets the value for Address Resolution Protocol (ARP) reachable time

Syntax Description

reachable-time Specifies setting the ARP reachable time.
reachable_time Sets the value for the ARP reachable time (range is 1–1,474,515,000 milliseconds or 1–1,474,515 seconds).
auto Specifies having the ARP reachable time set automatically to 3/4 of the configured ARP timeout (default).
milliseconds When setting the reachable time value, specifies milliseconds as the time unit (range is 1–1,474,515,000).
seconds When setting the reachable time value, specifies seconds (range is 1–1,474,515) as the time unit (default).

Default

The default setting is for the reachable time to be set automatically to 3/4 of the configured ARP timeout. If you set the time manually, the default unit of measure for the value is seconds.

Example

The following example sets the reachable time to 500,000 seconds:
configure iparp reachable-time 500000 seconds

History

This command was first available in ExtremeXOS 11.1.

Platform Availability

This command is available on all Universal switches supported in this document.