show bfd session client

show bfd session client [ bgp {ipv4 | ipv6} | mpls | ospf {ipv4 | ipv6} | static {ipv4 | ipv6}] {vr [vrname | all]}

Description

Displays the BFD session information for a specified client.

Syntax Description

bgp BGP
mpls Specifies an MPLS client.
ospf OSPF protocol.
ipv4 Displays sessions requested by IPv4 version client, e.g. OSPFv2 (Default).
ipv6 Displays sessions requested by IPv6 version client, e.g. OSPFv3.
static Specifies a static route.
vrname Specifies the name of the virtual router.

Default

IPv4.

Usage Guidelines

Use this command to display session information for a specified client.

Example

The following command displays the BFD sessions for an MPLS client on all VRs:

# show bfd session client mpls vr all

Following is sample output from this command:

Neighbor     Interface      Detection   Status
---------     --------       ---------   -----
10.10.10.2    vlan10      3000        Up
===============================================
NOTE: All timers in milliseconds.

History

This command was first available in ExtremeXOS 12.4.

Support for BFD protected static route was added in ExtremeXOS 12.5.3.

The ospf keyword was added in ExtremeXOS 15.3.2.

Support for border gateway protocol (BGP) was added in ExtremeXOS 21.1.

Platform Availability

This command is available on all Universal switches supported in this document.