show sflow hardware-utilization

show sflow hardware-utilization {slot [slot_num | all]}

Description

Displays sFlow hardware table utilization statistics.

Syntax Description

hardware-utilization Specifies showing hardware table utilization statistics.
slot Specifies selecting slots.
slot_num Specifies which slots to show statistics for.
all Specifies showing statistics for all slots.

Default

N/A.

Usage Guidelines

This command displays sFlow hardware table utilization statistics for your system.

Example

The following example shows sFlow hardware table utilization statistics.

# show sflow hardware-utilization
sFlow Hardware Table Utilization Statistics

Resource Type           Current    Maximum    % Util.
--------------------    -------    -------    -------
MAC Entries                   3      73727          0 
Host Entries                  4      73728          0 
IPv4 Entries                  0      73728          0 
IPv6 Entries                  2      36864          0 
Long IPv6 Entries             0       2048          0 
Total Routes                 11       8192          0 
IPv4 Neighbors                5        N/A        N/A 
IPv6 Neighbors                0        N/A        N/A 
IPv4 routes                   3        N/A        N/A 
IPv6 routes                   3        N/A        N/A 
ECMP Next Hops                2       1023          0 
ACL Ingress Entries          42      10752          0 
ACL Ingress Counters          0     233472          0 
ACL Ingress Meters            0      12288          0 
ACL Ingress Slices            0         12          0 
ACL Egress Slices             0          4          0

Legend: N/A - Maximum not defined in published sFlow structure.
              Also see IP usage in 'show iproute reserved-entries statistics'.

History

This command was first available in ExtremeXOS 22.5.

Ability to select slots in a stack was added in ExtremeXOS 22.6.

Legend explaining N/A entries was added in ExtremeXOS 30.1.

Platform Availability

This command is available on all Universal switches supported in this document.