enable switch usb

enable switch usb

Description

Enables use of the switch's USB port.

Syntax Description

usb Specifies USB port on switch.

Default

Enabled by default.

Usage Guidelines

This command requires a reboot to take effect. This setting persists after reboots. To remove it, use the command disable switch usb or use the command unconfigure switch {all | erase [all | nvram]} with the all option.

Stack support is not available. You need to run this command individually on each node in a stack.

Example

The following example enables use of the USB port:

enable switch usb
This setting will take effect at the next system reboot.

History

This command was first available in ExtremeXOS 22.3.

Platform Availability

This command is available on all Universal switches supported in this document.