enable stpd

enable stpd {stpd_name}

Description

Enables the STP protocol for one or all STPDs.

Syntax Description

stpd_name Specifies an STPD name on the switch.

Default

Enabled.

Usage Guidelines

If you want to enable the STP protocol for all STPDs, do not specify an STPD name.

Example

The following command enables an STPD named Backbone_st:

enable stpd backbone_st

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all Universal switches supported in this document.