configure iproute add direct-inter-vr

configure iproute add direct-inter-vr {ipv4} [{vlan} from_vlan_name | vlan from_vlan_list] {{vr} to_vr_name}

Description

Adds the direct routes of a VLAN or set of VLANs to be leaked to the leak-to-VR.

Syntax Description

direct-inter-vr Specifies to leak direct routes of specified VLAN(s) to a different VR. Adjacent (directly connected) hosts are also reachable in the specified VR.
ipv4 Specifies the IPv4 address family. Only IPv4 is supported.
vlan Specifies the VLAN name or list of VLAN IDs whose direct routes are leaked to a different VR.
from_vlan_name Specifies to replicate the direct routes of the hardware and software forwarding tables and the adjacent hosts of the specified VLAN name to the specified leak-to-VR.
from_vlan_list Specifies to replicate the direct routes of the hardware and software forwarding tables and the adjacent hosts of the specified VLAN list to the specified leak-to-VR. Range is 1-4094.
vr Specifies the virtual router to which direct routes are leaked.
to_vr_name Specifies the virtual router to which direct routes are leaked. If not specified, the context of the current VR is used.

Usage Guidelines

This command is used to support leaking of direct routes from one VR to another by allowing a configuration to leak one or more L3 interface routes to another VR.

Example

The following example adds the direct routes of VLAN 'yellow' to be leaked to the leak-to-VR 'VR2'.

# configure iproute add direct-inter-vr yellow vr VR2

History

This command was first available in ExtremeXOS 32.4.

Platform Availability

This command is available on all Universal switches supported in this document.