show mvrp

show mvrp

Description

This command is used to show the mvrp settings as follows. If the MVRP enabled port is a load shared port, a suffix ‘g‘ is displayed.

Syntax Description

mvrp Multiple VLAN Registration Protocol.

Default

N/A.

Usage Guidelines

Use this command to show the MVRP settings.

Example

# show mvrp   
MVRP enabled               : Enabled   
MVRP dynamic VLAN creation : Enabled
MVRP VLAN registration     : Forbidden 
MVRP default STP domain    : s0   
MVRP enabled ports         : 9    *11    *13
Flags: (*) Active, (!) Administratively disabled.
       (g) Load Sharing Port
       (G) Multi-switch LAG Group port 

History

This command was first available in ExtremeXOS 15.3.

MRVP VLAN registration output was added in 15.3.2.

Flag showing if the MVRP-enabled port is an This command is available on all Universal switches supported in this document. port added in ExtremeXOS 22.1

Platform Availability

This command is available on all Universal switches supported in this document.