show tech-support collector

show tech-support collector { hostname | ip_address}

Description

This command displays tech-support configuration and report status.

Syntax Description

hostname Specifies the host name of the collector.
ip_address Specifies the IPv4 address of the collector.

Default

NA.

Usage Guidelines

This commands displays tech-support configuration and report status, such as last report stats, when the next cyclic report is sent if report frequency daily is configured, and when the next one time report is sent if one time report is scheduled with run tech-support in hours command. If you do not specify a hostname or IP address, this command displays configuration and report status for all existing collectors; otherwise it displays configuration and report status for the specified collector.

Example

The following is an example of the show output:

Tech Support Collector:    Enabled 

Report Collector:          10.5.2.107    
    TCP Port:              9998
    Virtual Router:        VR-Mgmt
    Source IP Addr:        10.66.24.234
    SSL:                   Off
    Report Mode:           Automatic
    Report Data Set:       Summary
    Report Frequency:      Error-detected AND Daily at 0:00
    Last Report:           Successful        
      Sent On:             Thu Feb 21 05:06:32 2013  
      From:                10.66.24.234:3546       
      To:                  10.5.2.107:9998     
      SSL:                 Off       
      Error:               None
    Next Cyclic Report:    Scheduled on Fri Feb 22 00:00:00 2013    
    Next One Time Report:  Not Scheduled 

Report Collector:          10.5.2.108
    TCP Port:              800
    Virtual Router:        VR-Mgmt
    Source IP Addr:        10.66.24.234
    SSL:                   On
    Report Mode:           Automatic
    Report Data Set:       Detail
    Report Frequency:      Bootup AND Daily at 0:00
    Last Report:           Failed        
      Sent On:             Thu Feb 21 05:06:32 2013  
      From:                10.66.24.234:3598       
      To:                  10.5.2.107:800     
      SSL:                 On        
      Error:               Socket time out
    Next Cyclic Report:    Scheduled on Fri Feb 22 00:00:00 2013
    Next One Time Report:  Not Scheduled

History

This command was first available in ExtremeXOS 15.4.

Platform Availability

This command is available on all Universal switches supported in this document.