enable ntp broadcast-client

enable ntp broadcast-client {{vr} vr_name}

Description

Enables an NTP broadcast client on the switch.

Syntax Description

broadcast-client Specifies enabling NTP broadcast client.
vr Specifies enabling NTP broadcast client for a VR.
vr_name Specifies the VR name. If a VR name is not specified, the VR of current command context is used.

Default

An NTP broadcast client is enabled by default.

If a VR name is not specified, the VR of current command context is used.

Usage Guidelines

If the broadcast client function is enabled, the system can receive broadcast-based NTP messages and process them only if a VLAN is enabled for NTP and the VLAN is active.

Example

The following command enables an NTP broadcast client on the switch:

enable ntp broadcast-client

History

This command was first available in ExtremeXOS 12.7.

The vr was added in ExtremeXOS 22.2.

Platform Availability

This command is available on all Universal switches supported in this document.