configure stpd ports loop-protect

configure stpd stpd_name ports loop-protect [on | off] port_list

Description

Enables and disables loop protect on a port.

Syntax Description

stpd_name Specifies an STPD name on the switch.
on Enables loop protect on the specified port.
off Disables loop protect on the specified port.
port_list Specifies one or more ports or slots and ports.

Default

By default, loop protect is off.

Usage Guidelines

Loop protect prevents loops due to misconfiguration or one-way communication failures.

Example

The following example enables loop protect on port 1:10 in the STP domain r1:

configure stpd r1 ports loop-protect on 1:10

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on all Universal switches supported in this document.