enable iparp refresh

enable iparp {vr vr_name} refresh

Description

Enables IP ARP to refresh its IP ARP entries before timing out.

Syntax Description

vr_name Specifies a VR or VRF.

Default

Enabled.

Usage Guidelines

If ARP refresh is enabled, the switch resends ARP requests for the host at 3/4 of the configured ARP timer value.

For example: If the ARP timeout is set to 20 minutes, the switch attempts to resend an ARP request for the host when the host entry is at 15 minutes. If the host replies, the ARP entry is reset back to 0, and the timer starts again.

If you do not specify a VR or VRF, the command applies to the current VR context.

Example

The following example enables IP ARP refresh:

enable iparp refresh

History

This command was first available in ExtremeXOS 10.1.

The vr option was added in ExtremeXOS 11.0.

Platform Availability

This command is available on all Universal switches supported in this document.