show ports stack-ports qosmonitor

show ports stack-ports stack_port_list qosmonitor {no-refresh | refresh} {port-number}

Description

Displays traffic counts for each QoS profile on the specified stacking ports.

Syntax Description

stack_port_list Specifies one or more stacking ports.
no-refresh Specifies a static snapshot of data instead of the default dynamic display.
refresh Specifies a continuous refresh of output.
port-number Displays port number instead of display string in the output of the command.

Default

Displays packet counts in real-time.

If you do not specify a port number or range of ports, traffic counts appear for all ports.

Usage Guidelines

The bottom line in the real-time display shows keys that you can press to change the display. For example, the space bar changes the display from QoS traffic counts in either packets or bytes.

If you specify the no-refresh option, you see a snapshot of the data at the time you issued the command.

Example

The following example shows the packet counts for ports 1:1 and 1:2:
# show ports stack-ports 1:1-1:2 qosmonitor
Qos Monitor Req Summary                                Fri Apr  21 10:58:23 2017
Port      QP1      QP2      QP3      QP4      QP5      QP6      QP7      QP8
Pkt      Pkt      Pkt      Pkt      Pkt      Pkt      Pkt      Pkt
Xmts     Xmts     Xmts     Xmts     Xmts     Xmts     Xmts     Xmts
================================================================================
1:1         0        0        0        0        0        0        0        0
1:2         0        0        0        0        0        0        0        0
================================================================================
> indicates Port Display Name truncated past 8 characters
Spacebar->Toggle screen 0->Clear counters  U->Page up  D->Page down ESC->exit

History

This command was first available in ExtremeXOS 22.3.

Platform Availability

This command is available on all Universal switches supported in this document.