enable mvrp ports

enable mvrp ports [port_list | all]

Description

Enables MVRP on a given set of ports.

Syntax Description

mvrp Multiple VLAN Registration Protocol
port_list Port(s) on which MVRP is to be enabled.
all All ports.

Default

Disabled.

Usage Guidelines

Use this command to enable MVRP on given set of ports. MVRP is run on the MVRP enabled ports only if the global setting is enabled. By default, MVRP is disabled globally and on individual ports. When MVRP is disabled globally, all MVRP packets will be forwarded transparently. An error message is displayed if the user tries to enable/disable MVRP on a lag member port which is not the master port. No configuration changes are made.

Example

The following command enables MVRP on ports 4 and 5:

enable mvrp ports 4-5

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on all Universal switches supported in this document.