enable slpp guard

enable slpp guard ports [port_list | all]

Description

Enables the Simple Loop Protection Protocol (SLPP) Guard feature.

Syntax Description

slpp Specifies enabling SLPP.
guard Specifies disabling a port as soon as an SLPP PDU is received.
ports Specifies selecting ports on which to enable SLPP guard.
port_list Selects which ports to enable SLPP guard on.
all Specifies enabling SLPP guard on all ports.

Default

By default, SLPP Guard is disabled on all ports.

Usage Guidelines

SLPP is an application that detects loops in a Split Multi-link Trunking (SMLT) network. SLPP Guard is a complementary feature that helps prevent loops in networks by administratively disabling an edge port if a switch receives an SLPP PDU from an SMLT network.

Example

The following example enables SLPP Guard on port 5:

# enable slpp guard ports 5

History

This command was first available in ExtremeXOS 30.2.

Platform Availability

This command is available on all Universal switches supported in this document.