disable stpd rapid-root-failover

disable stpd stpd_name rapid-root-failover

Description

Disables rapid root failover for STP recovery times.

Syntax Description

stpd_name Specifies an STPD name on the switch.

Default

Disabled.

Usage Guidelines

This command is applicable for STPDs operating in 802.1D.

After you have created the STPD with a unique name, the keyword stpd is optional.

To view the status of rapid root failover on the switch, use the show stpd command. The show stpd command displays information about the STPD configuration on the switch including the enable/disable state for rapid root failover.

Example

The following command disables rapid root fail over on STPD Backbone_st:

disable stpd backbone_st rapid-root-failover

History

This command was first available in ExtremeXOS 10.1.

Platform Availability

This command is available on all Universal switches supported in this document.